PUMP IT !
Grease Trap Maintenance
How Often Does A Grease Trap Need Pumping?
The required pumping frequency is generally determined by Water Corporation Trade Waste.
Factors that influence pumping frequency include:
Size of the grease trap.
Number of customers served.
Type of food being prepared.
Volume of wastewater generated.
Overall scale of the business.
Most businesses operate under a scheduled maintenance program established through their Trade Waste approval conditions.
Who Can Do This ?
There are many pumping contractors through Perth whom can do this. We recommend a great company called Advanced Liquid Waste
What Happens To The Collected Grease?
The accumulated fats, oils, and grease must be removed periodically by a licensed grease trap pumping contractor. A vacuum tanker pumps out the contents of the grease trap and disposes of the waste at approved processing facilities. Regular pumping is essential to ensure the grease trap continues operating effectively and remains compliant.
PUMPS & LIFTING STATIONS
Pump stations can provide excellent solutions where natural gravity drainage is not achievable. A pump can be used to pump waste water to the grease trap or from the grease trap back to the sewer system.
Sometimes when a customer refers to pumping, they are actually wanting to have their grease trap cleaned out. Click here to see Grease Trap Maintenance section.
Below is everything you should know in relation grease trap pumps and pumping grease traps.
HOT TIP:
Whenever possible, gravity-fed systems are preferred. A gravity system contains fewer mechanical components and generally offers lower long-term maintenance costs. Pumps are mechanical devices and, like all mechanical equipment, will eventually require servicing or replacement.
PUMP MAINTENANCE & SUPPLY
PUMP MAINTENANCE
All grease trap pump systems should be inspected, cleaned, and serviced every 6–12 months. Fats, oils, and grease can accumulate within pumps and pipework, reducing efficiency and increasing failure risk. We provide complete grease trap pump maintenance and servicing throughout Perth.
POWER SUPPLY
Most commercial grease trap pumps operate using a standard 240V electrical supply. Additional electrical works may occasionally be required depending on site conditions.
DOWNSTREAM PUMPS
Downstream pumps are typically larger systems installed after the grease trap. These are commonly located underground beside the grease trap or within dedicated pump pits.
Airtight sealed lids.
Submersible pump systems.
Traffic-able options available.
Can pump wastewater over significant distances.
Depending on design requirements, downstream systems can pump 200–300 metres or more.
Typical pump pits are approximately:
500 litres capacity
700mm x 700mm
1000mm deep
UPSTREAM PUMPS
Upstream pumps are commonly installed beneath kitchen sinks or nearby service areas. They transfer greasy wastewater to a grease trap located elsewhere on the property.
Avoids extensive floor cutting.
Reduces installation costs.
Faster installation.
Can pump up to approximately 100 metres depending on system design.
These systems are particularly popular in smaller cafes and tenancy fit-outs.
Need A Grease Trap Installed In Perth?
We provide:
✔ Grease Trap Design
✔ Water Corporation Trade Waste Assistance
✔ Above-Ground Grease Traps
✔ Below-Ground Grease Traps
✔ Pump Stations & Lifting Stations
✔ Grease Trap Replacements
✔ Commercial Plumbing Works
✔ Grease Trap Servicing & Maintenance
Whether you're opening a new cafe, upgrading an existing restaurant, replacing a non-compliant grease trap, or responding to a Water Corporation requirement, our team can help.
Contact The Plumbing & Electrical Co today for afree on-site grease trap assessment anywhere in Perth.